Home  |   About Us  |   Products  |   Exports  |  Contact Us

Straight Knife Grinding Machinery

Salient Features:-

1. Machine Bed:
   Welded, modular construction Principle.
   Smooth inner area for good cooling water drainage and easy cleaning.

2. Guide ways:
   Hardened and ground steel bands for main and side guides, easily exchangeable.

3. Machine Table:
   Fixed for flat grinding with total table coverage, in Electro-Magnetic design or as cast iron table with 'T' slots & clamps.
   Electro-Magnetic swiveling table for flat, bevel and multi surface grinding, in one setting up operation, swiveling 360 degree, multiple bearing points with large diameter journals for maximum rigidity. Additional clamping sides with 'T' slots and clamps.
   Swiveling table in casts iron for mechanical clamping. 
   Mechanically table locking, by hand.
    

1. Grinding Head Carriage:
   Heavy casting mounting on four reels with eight New-Departure dust proof ball bearings which act as rollers of Straight Knife Grinding Machinery. Four reels guides the carriage in the carriage ways of the bed. The sliding base, mounted on the top of the carriage, is adjustable the feed the grinding segmental or cup-wheel to the knife of grinding machine. The motor base can be swiveled 10 to 25 degrees, so that knife can be ground either straight or concave as paper knives require only 5 degrees swivel of motor base.

2. Down-Feed for Grinding Tool:
   Multiple spindle system for play and weight equalization.

3. Grinding Motor:
   Knife Grinding Machine Motors SIEMENS or NGEF Brand.

4. Grinding head:
   Cylindrical type bonded to flange for light grinders, segmental heads for heavy grinding machines.
   For quick re-setting of changing of segments, an easily accessible changing station is situated at the rear of the machine.
   To ensure vibration free running, all grinding wheel flanges and segmental heads are fitted with adjustable balancing weights. For obtaining maximum segment use, patented segment savers in Knife Grinding Maching.
   can be used. 

5. Cooling System in knife grinding machine:
   Water tank attached with the machine. Cooling fluid application by the electro-coolant pump in Straight Knife Grinding Machinery.

6. Electrical Unit:
   All electrical controls are housed in the master panel board.

Knife Grinding Machine Specifications

Keywords: Knife Grinding Machine, Re Grinding Machine, Straight Knife Grinding Machinery

All contents copyright © 2001 Star Engineering Corporation., All rights reserved